Trade prices — no account needed

Flooring Adhesives UK

10 products

Our flooring adhesives range covers every fixing job on site, from high-tack carpet and vinyl adhesives to specialist LVT, wood and ceramic bonds. We stock trusted trade brands including F. Ball, Mapei and Tilemaster, so you can match the right adhesive to the subfloor, floor covering and traffic level of each project.

Product results

Product results

Showing 10 of 10 products

SO Tackifier – 22ltr

SO Flooring Products

SO Tackifier – 22ltr

Pack size: 22L

Available to buy

£174.14inc VAT

per tub

£145.12 ex VAT

SO 599 – 500ml

SO Flooring Products

SO 599 – 500ml

Pack size: 500ml

Available to buy

£5.39inc VAT

per tub

£4.49 ex VAT

Flexible Tile Adhesive 20kg

ThermoSphere

Flexible Tile Adhesive 20kg

Pack size: 20kg

Available to buy

Was £53.77 inc VAT

£37.99inc VAT

per tub

£31.66 ex VAT

Choose from acrylic and pressure-sensitive adhesives for resilient floors, two-part epoxy and polyurethane systems for demanding commercial areas, and primers and tackifiers that prepare and stabilise the subfloor before fixing. We also supply sealants and bonding agents for edges, joints and damp-prone areas.

Every adhesive is selected for professional flooring installers who need reliable coverage, predictable open times and a strong, lasting bond. Not sure which adhesive suits your subfloor? Call our team for expert advice and we'll help you specify the correct product and quantity for the job.

What to check before you order

  • Match the adhesive to the floor covering: carpet, sheet vinyl, LVT, wood and ceramic all call for different products.
  • Check the subfloor. Absorbent screeds usually need priming first; non-absorbent and damp subfloors may need a DPM before any adhesive goes down.
  • Read the coverage figure on the product page — it is quoted per tub and varies with trowel notch and subfloor porosity.
  • Allow for open and working times if you are fitting a large area or working in a warm building.
  • Confirm the tub size you are ordering. Where a range is sold in more than one size, the size is shown in the product title and on the option selector.
Subfloor preparation guide

Adhesives questions

Which adhesive do I need for LVT?
Glue-down LVT is normally fixed with a pressure-sensitive or acrylic adhesive suited to resilient floor coverings. Always check the flooring manufacturer's own recommendation on the product datasheet, because some LVT ranges specify a particular adhesive type for warranty purposes.
Do I need to prime before adhesive?
Most absorbent subfloors — sand/cement screed, smoothing compound, plywood — are primed so the adhesive does not dry out too quickly. Non-absorbent surfaces such as power-floated concrete or old adhesive residue have their own primer requirements. The primer to use is stated on each adhesive's datasheet.
How much adhesive will I need?
Coverage depends on the trowel notch and the subfloor. Each product page shows the coverage quoted by the manufacturer for that tub size. If you tell us the area and the floor covering, we can work the quantity out with you on the phone.